QMS 860, User Manual, Page: 267 / 398

follows describes how to install the font or emulation card
on your hard disk. Once the font or emulation is stored on
disk, they can be downloaded to the printer’s memory
when needed for printing.
How to Install an Option
After you have accessed the Administration/Disk Operations
menu, press the control panel keys in the order shown in the
following instructions to install an option. The printer responds by
displaying a status message in the message window. You may need
to press the Next key one or more times to advance through the list
of selections or options. The following symbols are used in this
procedure: the disk or card number is designated with the “#”
symbol and the card number is CAR0 or CAR1.
Control
Panel Keys
Message Window Printer Response
SELECT
DISK OPERATIONS
INSTALL OPTION
Acce sses Di sk Op era-
tions/Install Option.
NEXT or
SELECT
INSTALL OPTION
DSK#:
Advances through the list
of hard disks or accesses
the selected hard disk and
installs the option.
SELECT
INSTALL SOURCE
CAR#:
Accesses the card address
that the option is being in-
stalled from.
SELECT
INSTALL OPTION
INSERT MEDIA
Starts the option install
when the card is inserted.
INSTALL OPTION
READING DATA...
Displays a reading mes-
sage while reading data on
the card and installing the
option and files to the disk.
This usually takes several
minutes.
Chapter 8
P r i n t e r O p t i o n s 8 - 5 2