QMS 860, User Manual, Page: 255 / 398

Optional Network Interface Assembly Kit
The optional network interface assembly kit includes the
following:
■ An anti-static wristband
■ A daughterboard and two plastic support posts
■ A network interface board
■ Four screws
Installing an Optional Network Interface
An optional network interface is installed as follows.
CAUTION: Eliminate static by putting on the anti-static wristband
provided with your printer option accessory kit and grounding it to
any base metal surface (such as the bottom of your telephone).
Avoid walking around after grounding yourself because your body
may build up static and you will have to repeat the grounding
process.
WARNING:
Turn off the printer and unplug the power cord
before taking the cover off the printer.
ACHTUNG:
Bitte schalten Sie den Drucker aus und ziehen
Sie den Netzstecker heraus bevor Sie die Druckerabdeckung
öffnen.
1. Turn off the printer. Disconnect the power cord and all
interface cables (parallel, serial, and AppleTalk) from the
printer.
Chapter 8
P r i n t e r O p t i o n s 8 - 4 0