manualshive.com logo in svg

QMS 860, User Manual, Page: 243 / 398

Share
Download
QMS 860 User Manual Download Page 243

 WARNING: 

Turn off the printer and unplug the power cord

before taking the cover off the printer.

 ACHTUNG: 

Bitte schalten Sie den Drucker aus und ziehen

Sie den Netzstecker heraus bevor Sie die Druckerabdeckung
öffnen.

1.

Turn off the printer. Disconnect the power cord and all
interface cables (parallel, serial, AppleTalk, and the optional
interface) from the printer.

2.

Open the multipurpose tray, using both hands.

3.

Push up on the release button and open the printer’s front
cover.

4.

Remove and set aside the two screws on each end of the front
inside of the printer (fig. 8.16).

Fig. 8.16  Remove the Front Inside Screws

Chapter 8

8 - 3 0

P r i n t e r   O p t i o n s

Summary of Contents for 860















































































































































































































































































































































































































Reviews:

No comments