manualshive.com logo in svg

QMS 860, User Manual, Page: 235 / 398

Share
Download
QMS 860 User Manual Download Page 235

2.

Insert the font or emulation card into either slot with the QMS
label side facing up (fig. 8.14).

3.

Press the Online/Offline key to put the printer back on line.

NOTE: If you are using a font card, you should also make sure

that the printer driver you have installed for each
application supports the fonts on the card. If it does not,
contact your application manufacturer for support.

Removing Font and Emulation Cards

Use the following procedure to remove a font or emulation card:

1.

Take the printer off line.

2.

Pull out the card gently.

3.

Put the printer back on line.

Fig. 8.14  Insert the Font or Emulation Card

Chapter 8

8 - 2 2

P r i n t e r   O p t i o n s

Summary of Contents for 860















































































































































































































































































































































































































Reviews:

No comments