QMS 860, User Manual, Page: 228 / 398

Removing the Cassette Supporter
If you find it necessary to remove the cassette supporter from the
printer, use the following procedure:
1. Turn off the printer. Disconnect the power cord and all
interface cables.
2. Remove any installed paper cassettes from the printer.
3. Remove the paper feeder from the printer by following the
steps in the “Removing the Paper Feeder” section earlier in
this chapter.
4. Remove the cassette supporter by following the steps in the
“Installing the Cassette Supporter” section earlier in this
chapter in reverse order. The following is a quick reference
guideline to removing the cassette supporter:
a. Remove the paper feeder from the cassette supporter.
b. Pull the lock buttons out on the cassette supporter to remove the
paper feeder.
c. Take the paper feeder off the cassette supporter.
d. Push the lock buttons in on the cassette supporter.
e. Reconnect the interface cables and power cord.
f. Turn on the printer.
Chapter 8
P r i n t e r O p t i o n s 8 - 1 5