QMS 860, User Manual, Page: 187 / 398

2. Locate the density adjustment dial that is inside the printer on
the right side (fig. 6.1). The scale on the density adjustment
dial shows the density setting; the dark marking increases
density, and the light marking reduces density.
To increase density (darken print on the page) rotate the dial
up, using your left thumb. To decrease density (lighten print
on the page) rotate the dial down. The dial clicks at the center
setting. Adjust the dial to your desired setting.
NOTE: You may want to increase density as the toner cartridge
depletes.
Density Adjustment Dial
To Darken
To Lighten
Fig. 6.1 Adjust the Print Density
Chapter 6
6 - 2 P r i n t Q u a l i t y