QMS 860, User Manual, Page: 180 / 398

Caring for the Printer
Blurred or splotchy prints and paper jams can result from dusty
printer parts. Regular cleaning takes only a few minutes and helps
ensure print quality. Printer parts that require cleaning are the
transparent sheet area and the outside surface of the printer.
Handling the Printer
Handle the printer with care to preserve its life. Abuse may cause
damage.
■ Do not place anything on the top of the printer.
■ Do not place anything on the multipurpose tray except the
media being used for printing.
■ Do not leave the printer open for any length of time,
especially in well-lit places; light may damage the toner
cartridge.
■ Wait until the printer has cooled down before covering it
with a dust cover.
■ Lift the printer from the bottom only. Make sure two
people are available to lift the printer when moving it.
■ Keep the output tray at minimum level. If paper stacks too
high, you may experience print media jams and excessive
paper curl.
■ Do not attempt to lubricate or disassemble the printer.
■ Store the printer under the following conditions when it is
not going to be used for an extended period:
Unplug the power cord from the power source outlet.
Chapter 5
D a i l y O p e r a t i o n s 5 - 4 5