Home
/
QMS
/
860
/
User Manual

QMS 860, User Manual, Page: 168 / 398

Share

Page: 168 / 398

QMS 860 User Manual Download Page 168

Installing the Toner Cartridge

The toner cartridge contains the toner and photosensitive drum
needed to operate the laser printer. The cartridge

■

Is sensitive to bright light. Do not remove the toner
cartridge from its protective bag until you are ready for
installation.

■

Should be kept level for storage. Do not stand or store the
cartridge on its end.

■

Should be kept away from CRTs, disk drives, and floppy
disks. The magnets in the cartridge can damage stored
data.

You may purchase additional cartridges from your QMS vendor.
See appendix B, the “Print Engine” section, for toner
specifications.

WARNING:

The fixing assembly and print delivery guide

areas become extremely hot when the printer is used. Personal
injury could result if you touch those areas when opening the
front cover or installing the toner cartridge.

ACHTUNG:

Sowohl die Fixiereinheit als auch die Papier-

führung werden im Druckbetrieb extrem heiß. Um Verletzun-
gen zu vermeiden, sollten diese Druckerpartien, z.B. wenn Sie
eine neue Tonerkartusche einlegen, nicht berührt werden!

1.

Lift the toner cartridge out of its shipping carton, open the
aluminum protective bag, and remove the cartridge.

Chapter 5

D a i l y O p e r a t i o n s

5 - 3 3

«
...
166
167
168
169
170
...
»

Summary of Contents for 860















































































































































































































































































































































































































Reviews:

No comments