QMS 860, User Manual, Page: 164 / 398

Clearing Multipurpose Tray Area Jams
NOTE: Leaving print media in the multipurpose tray can cause
the print media position to shift during removal of the
jam. This may result in a paper feed failure and another
jam when printing is restarted.
1. Open the multipurpose tray, using both hands. Remove all
print media remaining in the multipurpose tray and close the
tray extension.
2. Push up on the release button, and open the front cover.
3. Remove the print media from the paper pick-up area by
pulling in the direction of the arrow (fig. 5.20).
If the jam has been cleared, close the front door and printing will
restart. If you are unable to locate the jam in the multipurpose tray
area, check the areas for locating jams when using a paper cassette
described earlier in this chapter.
Fig. 5.20 Clear Paper Pick-up Area Jam
Chapter 5
D a i l y O p e r a t i o n s 5 - 2 9