QMS 860, User Manual, Page: 150 / 398

NOTE: Make sure that the print media does not exceed the limit
mark on the paper guide and that the middle plate at the
multipurpose tray’s paper entrance (fig. 5.12) is lowered
before inserting the paper. If the middle plate is raised,
turn the power off and then back on again before inserting
the print media.
5. Adjust the paper guides so that they touch the sides of the print
media.
Middle Plate
Fig. 5.12 Lower Paper Guide Middle Plate
Chapter 5
D a i l y O p e r a t i o n s 5 - 1 5