QMS 860, User Manual, Page: 131 / 398

NOTE: Errors may occur during these operations. An error
message displays until the Menu key is pressed. The
operations must be restarted from the beginning.
Install Option
Use this selection to add options, such as fonts and emulations, to
the hard disk via font and emulation cards. This selection copies
data from the card to the hard disk. See chapter 8, the “Installing
an Optional Font or Emulation” section, for information on how to
install an option.
Remove Option
Use this selection to remove a previously installed option and all
of its files. See chapter 8, the “Removing an Optional Font or
Emulation” section, for information on how to remove an option.
Format Disk
Use this selection to format a hard disk. See chapter 8, the “How
to Format a Disk” section, for information on how to format a disk.
Collation
Use this selection to specify which disk and how much of that disk
should be used to store collated print jobs when the jobs can not be
accommodated by RAM space. Collation is turned on in the
Operator Control / Collation menu (described earlier in this
chapter). The printer advances through the list of available hard
disk locations. (The # symbol represents the disk number). Turn
the printer off and back on again for the value to take effect.
Location (default DSK#; range DSK0-DSK6)
List of installed hard disks.
Chapter 4
P r i n t e r C o n f i g u r a t i o n 4 - 5 1