QMS 2425, Reference

Page: 88 / 244

(PXODWLRQV
406785%23ULQW6\VWHP5HIHUHQFH
'HIDXOW-RE3ULRULW\
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously.
(PXODWLRQV
Use the Administration/Emulations menu to set the parameters for the
available printer emulations. Optional printing emulations appear only
if installed.
» Note: To choose an emulation or ESP for a particular interface, use
the appropriate interface menu in the Administration/Communications
menu.
QBinary (Quoted Binary)—Enables quoted binary
communications protocol. Print jobs can change this
setting through PostScript operators. Data in the
printable ASCII range also prints.
QBinary Fixed—Enables quoted binary communications
protocol (BCP). Print jobs cannot alter change this
setting through PostScript operators. Data in the
printable ASCII range also prints.
Default
Normal
Notes See chapter 5, “Additional Technical Information,” for a
full discussion of PS Protocol.
Menu Administration/Communications/Network 2/Def Job
Prio
Choices
001-100 (highest-lowest priority)
Default 001 (highest priority)
Notes
For example, you can give jobs received via the
Ethernet interface priority over jobs received via the
parallel and serial interfaces.