QMS 2425, Reference

Page: 39 / 244

'XSOH[LQJ
3ULQWHU&RQILJXUDWLRQ
» Note: For information on printer-host communication using the
Ethernet interface or any of the Administration/Communications/
Network/CrownNet options, see chapter 2, “Printer
Configuration,” in the QMS CrownNet System Administrator’s
Guide. The Administration menu may be password protected with
an optional security key if the system administrator does not want
users changing defaults. See your QMS vendor for availability of
this option.
„
Installation Menu
Use this menu to establish passwords for the Operator Control
and Administration menus. This menu displays only when an
optional security key is installed.
$FFHVVLQJWKH&RQILJXUDWLRQ0HQX
To access the configuration menu, make sure the printer is idle (
IDLE
displays in the message window), then press the Online key to take
the printer off line (the Online indicator is not lighted), and finally
press the Menu key.
([DPSOH
The following table shows how to use control panel keys to access the
printer configuration menu. Press the control panel keys in the order
shown. The printer responds by displaying a status message or con-
figuration menu in the message window.
» Note: You may need to press the Next key more than one time to
advance through the list of options.
The printer must be off line and idle before you can access the config-
uration menu.
Press
this key to... The message
window reads...
Online
Turn off the Online indicator and
ready the printer for configuration.
IDLE
Menu Access the configuration menu.
CONFIGURATION
OPERATOR
CONTROL