QMS 2425, Reference

Page: 100 / 244

(PXODWLRQV
406785%23ULQW6\VWHP5HIHUHQFH
6FDOLQJ3HUFHQW
Identifies the percentage to reduce or enlarge an image.
» Note: To scale plots, select the paper size originally used for the plot
in the Paper Type menu and then enter the reduction or enlargement
needed to fit the plot on the new page in the Scaling Percent menu.
6HWWLQJ/LQH3ULQWHU3DUDPHWHUV
The following twelve configuration options are available.
$XWRZUDS
Indicates whether long lines are to be wrapped to the next line instead
of being truncated.
&KDUDFWHU0DS
Specifies the type of character map to be used.
Menu Administration/Emulations/HPGL/Scaling Percent
Choices
001-150 (1-150%)
Default 100 (100%)
Menu Administration/Emulations/Line Printer/Autowrap
Choices
On—Wrap long lines.
Off—Truncate long lines.
Default On
Menu Administration/Emulations/Line Printer/Character Map
Choices
ASCII, EBCDIC, PC ASCII, PC Multilingual
Default ASCII
Note
If you select the PC ASCII or PC Multilingual character
map, special PostScript fonts will be substituted for the
lineprinter character map.