QMS 2425, Getting Started

Page: 72 / 144

3&3ULQWLQJ
6RIWZDUH
406785%23ULQW6\VWHP*HWWLQJ6WDUWHG
,QVWDOOLQJD3RVW6FULSW3ULQWHU'ULYHU
If you're using Windows, we recommend that you install the
QMS-developed Windows driver, which is on the disk called Windows
Drivers (shipped with the printer). See “Installing the QMS Level 2
Windows Driver,” below.
If you're using a non-Windows application, read the printing sec-
tion of the application documentation for information on choosing a
PostScript or PCL driver. If the application does not provide a Post-
Script driver, contact the application manufacturer to see if one has
become available since you bought the program. Also, PostScript
drivers for some applications are available through the QMS bulletin
board and through CompuServe; see appendix A ,“QMS Customer
Support,” for information.
Also, check to see if application notes (tips for printing from specific
applications) are available for your application from Q-FAX, the QMS
bulletin board, or CompuServe. Appendix A, “QMS Customer Sup-
port,” explains how to use these QMS information services.
,QVWDOOLQJWKH406/HYHO:LQGRZV'ULYHU
:LQGRZV:LQGRZVDQG:LQGRZVIRU
:RUNJURXSV
System Requirements
The QMS Level 2 Windows printer drivers require the following hard-
ware and software:
„
An IBM or compatible computer with 386 or higher processor
„
A hard disk with at least 1 MB of free space
„
At least 4 MB of RAM
„
Windows 95 or either Windows 3.1 or Windows for Workgroups
3.11with MS-DOS 5.0
The QMS level 2 Windows driver supports all the printers features.
Use one of the following sets of instructions to install the QMS Level 2
Windows Driver.