QMS 2060, Reference

Page: 99 / 210

(QJLQH
3ULQWHU&RQILJXUDWLRQ
6HWWLQJ7RQHU/RZ$FWLRQ
You can configure the printer to stop or to continue printing when a
TONER LOW
error message is displayed in the message window.
6HWWLQJ(QHUJ\&RQVHUYDWLRQ
The Energy Saver option specifies whether the printer changes to a
low-power state (the engine remains on, but the fuser turns off) after
the printer is inactive for a user-defined length of time. When a print
job is received, the printer returns to normal power within 90 seconds.
6HWWLQJ7RQHU'HQVLW\
The Toner Density option adjusts the density of the toner that is laid
down on the paper.
Menu Administration/Engine/Toner Low Act.
Choices Continue—Continue printing when a
TONER LOW
message
displays.
Stop—Stop printing when a
TONER LOW
message displays.
Default Continue
Menu Administration/Engine/Energy Saver
Choices 15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours—Idle time
before activation of low-power state.
Off—Use normal power all of the time.
Default 1 hour
Menu Administration/Engine/Toner Density
Choices 0-7
0—Lightest setting
7—Darkest setting
Default 4
Notes Setting a toner density to less than 4 may result in printing
that is too light at 1200 dpi.