QMS 2060, Reference

Page: 41 / 210

&RQILJXUDWLRQ
3ULQWHU&RQILJXUDWLRQ
The options in the configuration menu are organized under three
main menus:
„
Operator Control Menu
Use this menu to select document processing options such as
copy count, choosing input paper bins, chaining input bins, and
duplexing (if a duplexing unit is installed).
Document processing options are usually specified within individ-
ual jobs since each job has its own requirements. However, if
there’s no way of specifying these options within an application,
use the control panel to change options, send the job, and then
change the defaults back.
» Note: Defining document processing options for a particular job
through the control panel is not recommended in a shared
environment. When many systems are using the same printer,
there’s no way of making sure that no other jobs are sent to the
printer while the defaults are changed. The Operator Control
menu may be password protected with an optional security key if
the system administrator does not want users changing defaults.
„
Administration Menu
Use this menu to maintain printer-host communication informa-
tion, and to select and configure printer emulations, configure
special pages, print engine calibration, and configure hard disks
(if installed).
» Note: For information on printer-host communication using the
Ethernet interface or any of the Administration/Communications/
Network/CrownNet options, see the QMS CrownNet System
Administrator’s Guide. The Administration menu may be
password protected with an optional security key if the system
administrator does not want users changing defaults.
„
Installation Menu
Use this menu to establish passwords for the Operator Control
and Administration menus. This menu displays only when an
optional security key is installed.
» Note: This menu is not available when using Remote Console.