QMS 2060, Reference

Page: 141 / 210

0HPRU\
$GGLWLRQDO7HFKQLFDO,QIRUPDWLRQ
+DUG'LVN0DQDJHPHQW
You can add one internal IDE hard disk (standard on 2060 EX ) and
either up to three optional SCSI hard disks or the optional CrownCopy
scanner and up to two optional SCSI hard disks, to your QMS 2060
Print System. These hard disks serve as secondary storage places
for such items as downloaded fonts, emulations, and spooled data.
See FAQ 7181 for a list of each QMS-approved hard disk, its manu-
facturers and part numbers, and the QMS products on which it can be
used. You can access QMS FAQs through the Internet at
http://www.qms.com/support/supportbase/ or through Q-FAX (see
appendix A, “QMS Customer Support,” to find out how to access Q-
FAX documents).
» Note: FAQ numbers may be subject to change, so you may want to
obtain a directory of Q-FAX documents before requesting a specific
document.
9LUWXDO0HPRU\6XSSRUW
Your printer supports virtual memory capabilities for all of the memory
clients except Disk Cache and Frame Buffer when a hard disk is
installed and disk swapping is enabled (Administration/Memory/
Enable Disk Swap menu). These capabilities extend the amount of
memory available for certain supported features, such as spooling
and collation.
6SHFLILF3ULQWLQJ(QYLURQPHQW([DPSOH
Since configuring memory is not an exact science, it may be helpful to
see how others have allocated their printer memory to meet their
printing needs best. The following example is to be used only as a
example for configuring your own printer's memory.