QMS 2060, Reference

Page: 100 / 210

Engine
QMS 2060 Print System Reference 4-64
Setting Manual Feed Timeout
This option allows you to set the amount of time the printer waits for
paper to be inserted into the multipurpose tray before it cancels the
job.
Setting the Letterhead Option
This option appears only if the duplexing unit is installed on the
printer. The letterhead option allows you to print both simplex and
duplex jobs on letterhead paper from the same input bin without hav-
ing to sort the pages manually.
Print Quality
The Print Quality option allows the printer to operate at a lower rate of
toner consumption and extend the life of your toner cartridges. This
option also allows you to enable smoothing.
» Note: Smoothing does not work at 1200x1200 dpi.
Menu Administration/Engine/Man. Feed Timeout
Choices 000 - 300 seconds
Default 060 seconds
Notes A value of 000 sets the timeout to infinity
Menu Administration/Engine/Letterhead
Choices On, off
Default Off
Notes Load letterhead paper face down in the input bin with the long
edge inserted first and the top of the sheet toward the right
side of the printer. You may notice a decrease in the printing
speed depending on the mix of simplex and duplex pages.
Menu Administration/Engine/Print Quality
Choices Normal—Normal toner use.
Conserve Toner—Toner use is lowered.
Smooth(600dpi)—Requires Multi-Res daughterboard.