QMS 2025, Administrator'S Manual

Page: 79 / 158

ESP Default
Option
5-3 Emulations Submenu
ESP Default Option
The ESP Default lets you set which emulation the printer uses if the
Emulation Sensing Processor cannot identify the emulation of a print
job. ESP has a specific length of time within which it attempts to iden-
tify the emulation (see “Timeouts” in chapter 4 of this manual). If this
time expires, the printer automatically uses the emulation you select
as ESP Default to process the job.
The choices for ESP Default are those emulations supported by the
printer. The default value is PCL 5. If your print jobs are predomi-
nantly one emulation, select that emulation as the ESP Default.