QMS 19, User Manual, Page: 307 / 436

5. Disk 6 is the printer’s internal hard disk. Press the Select key.
The following message displays:
FORMAT
ARE YOU SURE?
NOTE: If you decide not to format the internal hard disk,
press the Menu key to back out of the submenus. When you
reach the top level, you can use the Next or Previous key to
select the menu you want.
6. Press the Select key to begin formatting. The message window
displays:
FORMAT DISK
FORMATTING
Then when formatting is finished, the message window
displays:
FORMAT DISK
COMPLETED
7. Press the Menu key until the following message appears:
QMS SOFTLOAD
x.x
INSTALL TO DISK
8. Go to the next section for information on reinstalling the
system software and fonts.
Installing Print System Software and Fonts
NOTE: The system software and fonts provided with the
magicolor LX printer will not function in other versions
of the magicolor printer (such as the magicolor or the
magicolor Plus). If magicolor LX software or fonts are
downloaded to a non-magicolor LX printer, an error
message will appear on the start-up page.
Chapter 8
P r i n t e r O p t i o n s 8 - 5 1
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500