QMS 1800409-001A, User Manual

Page: 269 / 436

Security Cards
An optional security card allows the Operator Control and
Administration menus to be password protected, so that only users
who know the password can change printer configurations. When
a security card is installed, a new menu, Installation, appears in the
printer’s Configuration menu. The Installation menu is used to
password-protect the printer.
CAUTION: The printer must be off line before you insert or
remove a security card. If you forget to take the printer off line
before you insert or remove a security card, turn the printer off and
back on again to regain access to the data stored in the printer’s
memory.
Using a Security Card
A security card uses the same slots as font and emulation cards.
The card slots are located on the front of the printer below the
control panel. The following instructions explain how to use a
security card:
1. Take the printer off line.
CAUTION: A security card fits in only one direction, with the front
label facing left, toward the center of the printer. Do not force the
card in backwards; this could damage the card and printer.
Chapter 8
P r i n t e r O p t i o n s 8 - 1 3