QMS 1725E, Reference

Page: 243 / 288

CCITT
Commands
C-25 Document Option Commands
ImageData
PageEnd
Function Instructs the emulation to begin decompression of the image
data using the currently set image options. This command begins
reading the image data after the end of the current line. After the
image, the input stream is flushed until the next set of %%
characters is encountered.
Syntax %%ImageData
Default None—no options.
Notes You must specify %%ImageSize before %%ImageData. If you
do not, the data following %%ImageData is absorbed with no
effect on the file.
Function Instructs the emulation to eject the current page (whether or not
any data has been printed to it) and clear the page memory. If an
image has not been decompressed since the beginning of the job
or since the last %%PageEnd, a blank page is ejected. You must
include this command for a page to be printed.
Syntax %%PageEnd
Default None—no options.
Notes You must include this command for a page to be printed.
Image data must be included after this command.