QMS 1725E, Reference

Page: 189 / 288

Kanji Fonts
6-59 Printer Options
Configuring the Printer
This section provides information on reconfiguring and adding addi-
tional memory, and configuring other menu options for Kanji.
Reconfigure the Memory
Due to the size of the Kanji two-byte font sets, you will need to re-
allocate the printer’s memory for specific memory clients.
» Note: Your printer can’t support Kanji with the standard memory; you
must add an additional 4 MB of memory to the printer for Kanji
support. This additional memory will also increase speed because
additional memory is allocated to font caching.
Procedure
We recommend that you read this entire procedure before modi-
fying any memory settings. If you experience problems when
reconfiguring the printer’s memory, reset the printer to the default
memory settings using the instructions provided in your printer
user’s guide for Administration/Memory/Frame Buffer.
O Caution::If you have already reconfigured your QMS printer’s memory
with settings specific to your print environment, do not use the Admin-
istration/Memory/Frame Buffer simplified method. Instead print an
advanced status page prior to changing them to the minimum Kanji
settings, in case you need to return to your original memory settings.
1 Access the Administration/Memory menu via the control
panel.