QMS 1725 SLS, User Manual

Page: 142 / 328

Keeping the
Printer Clean
QMS 1725 SLS Print System User's Guide 5-6
Keeping the Printer Clean
To maintain sharp print quality, clean the inside of the printer at the
following times:
n
Every time the toner cartridge is changed
n
After printing 8,000 single-sided pages
n
Whenever print quality becomes unsatisfactory
The inside of the printer must be wiped clean of any toner residue and
paper dust. The areas requiring regular cleaning are
n
The anti-static teeth
n
The transfer-guide lock-tray (green with handle)
n
The transfer-guide strip (silver metal)
n
The media-feed-guide area (black steel)
M WARNING! Unplug the printer’s power cord before cleaning the printer.
ACHTUNG! Ziehen Sie den Netzstecker aus der Steckdose bevor Sie den
Drucker reinigen.
Cleaning the Anti-Static Teeth
The anti-static teeth decrease the static charge placed on each sheet
of media as it passes through the printer. This allows the media to pull
toner from the toner cartridge drum. If the anti-static teeth are dirty, too
much of the static charge remains on the media and can cause light or
missing print on pages (especially in duplex operation).