QMS 1660E, Getting Started

Page: 60 / 114

Installing the
Software
QMS 1660E Print System Getting Started 4-6
OS/2
This is a two-part procedure. Some of the utilities are installed on the
print server and others on the workstation.
» Note: For information on installing the utilities directly on the
workstation, so you can bypass the print server and print directly to
the printer, see the
QMS CrownNet Interface System Administrator’s
Manual
.
Print Server
1 At the LAN Manager/LAN Server print server, log into the net-
work as the system administrator.
2 Insert the CrownNet Manager for OS/2 disk in the disk drive.
3 Open an OS/2 window, and at the C> prompt, change to the
drive in which you inserted the CrownNet Manager disk (for
example,
a:
↵
).
4 At the drive prompt type
lsminst x : y :
↵
where
x
is the drive in which you inserted the CrownNet
Manager disk, and y is the drive on which CrownNet
Manager will be installed (for example,
lsminst a: c:
↵
).
» Note: If you’ve previously installed the CrownNet Manager, you
can use
lsminst x: y: /u
↵
to force installation of the
upgraded software.
The installation program creates and installs the software in
a directory named
y :\CROWN.
» Note: You can’t install the utilities by copying files from the disks.
You must run the installation program.
5 Remove the disk from the disk drive and store it in a safe
place.