QMS 1060, User Manual

Page: 40 / 311

Configuration
Menu
QMS 1060 Print System Reference 4-6
» Note: You may need to press the Next key more than one time to
advance through the list of options.
The printer must be off line and idle before you can access the config-
uration menu to change printer configuration.
Selecting Configuration Menu Options
Once you access the configuration menu, you use the control panel
keys to move through the menu to access the appropriate option. Use
the following keys:
Example
To change the default printer emulation from ESP to PostScript, press
the control panel keys in the order shown in the following table.
Press
this
key... to... For 1.5
seconds, the
message
window reads... and then it
reads...
Online/
Offline Turn off the
Ready indicator
and enable printer
configuration.
IDLE IDLE
Menu Access the
configuration
menu.
CONFIGURATIO
N
OPERATOR
CONTROL
Press this
key... to...
Next Advance to the next option or submenu within a
menu.
Previous Return to the previous option or submenu within a
menu.
Select Select an option or enter a submenu.