QMS 1060, User Manual

Page: 39 / 311

Configuration
Menu
4-5 Printer Configuration
n
Installation Menu
Use this menu to establish passwords for the Operator Control
and Administration menus. This menu displays only when an
optional security card is installed.
n
Operator Control Menu
Use this menu to maintain document processing options (number
of copies, media type, and paper orientation). These capabilities
are usually handled most efficiently within specific print jobs since
each job has its own requirements. However, if there is no way of
specifying these options within a job, you may do so from the
control panel.
Accessing the Configuration Menu
To access the configuration menu, make sure the printer is idle (
IDLE
displays in the message window), then press the Online/Offline key to
take the printer off line (the Ready indicator is not lighted), and finally
press the Menu key.
Example
The following table shows how to use the control panel menu keys to
access the printer configuration menu. Press the control panel keys in
the order shown. The printer responds by displaying a status mes-
sage or configuration menu in the control panel message window.