QMS 1060, User Manual

Page: 207 / 311

Storage
Options
6-41 Printer Options
6 Secure the NIC to the printer with the two screws you
removed earlier.
7 Reconnect all interface cables and the power cord, and then
turn on the printer.
Using an Optional Network Interface
Once an optional network interface is installed, refer to the following
for more information:
n
Chapter 4, “Printer Configuration,” of this manual contains
information about the PS Protocol option in the new optional
network interface menu that appears in the Administration/
Communications menu. Chapter 5, “Additional Technical
Information,” contains a full discussion of PS Protocol.
n
The documentation that comes with the optional network inter-
face contains information about all other options in the new net-
work interface menu as well as instructions for connecting the
printer to the network and for printing over the network.
n
Your application and network documentation contain information
on printing over the network.
Storage Options
Hard disks provide true virtual memory as well as storage for charac-
ter bitmaps, downloaded outline fonts, and other files.
IDE-SCSI Board
An optional internal IDE-SCSI (Integrated Drive Electronics-Small
Computer System Interface) board supports an internal IDE hard disk
and up to three external SCSI hard disks.
» Note:
Ensure that your QMS 1060 Printer System is installed,
configured, and tested for proper operation before you attempt to
install the internal IDE hard disk on the IDE-SCSI board.