QMATIC Q-Entry SE, User Manual, Page: 43 / 119

133.01A Q-MATIC AB 33
the centre line is at position 224 which is the middle of the Ticket (the Ticket is
448 pixels wide).
Enter a value less than 224 to move the centre line to the left. Enter a value
above 224 to move the centre line to the right.
Note! This Control Command affects the line where it is entered and all lines
above.
[ESC]N
The text on the selected line is centred on the Ticket. This is the default setting
and the text will be automatically centred even if the Control code is omitted.
Note! [ESC]Mx (see above) affects the result of [ESC]N.
[ESC]P" filename "AT x , y
Place a logotype or any other picture on the Ticket. Replace file name with the
name of the picture file.
Note! The picture must be available in the Ticket Printer.
Note! There must be no spaces between the Control Command, the file name
and the co-ordinates.
Note! The file name must be inside quotation marks ("").
The picture is places at the position specified by x and y . X is the number of
pixels from the left edge of the Ticket and to the left side of the picture. Y is the
number of pixels from the bottom of the Ticket and to the bottom of the picture.
Example
We want to place a logotype at the top of the Ticket. The logotype is saved as
logo.pic. The following line places the logotype on the Ticket.
@p"logo.pic"at20,200
[ESC]R
Align the selected line to the right.
[ESC]S
Print all digits on the line with enlarged characters. This Control Code is used
when you want a number to have a dominating appearance. You can use
[ESC]S together with change width ([ESC]B) and change height ([ESC]H).
Note! You cannot use [ESC]S together with select font ([ESC]G).
[ESC]U
Print the text on the line upside-down.
[ESC]Y x