3–Fibre Channel Configuration
Using Fast!UTIL for Custom Configuration
42
BK3254601-00 C
Fibre Disk Utility
The
Fibre Disk Utility
option scans the Fibre Channel loop and lists all the
connected devices by loop ID. You can select a Fibre Channel hard disk and do
one of the following tasks:
Perform a low-level format
Verify the disk media
Verify the disk data (Some targets do not support this feature.)
Select a disk device
Loopback Data Test
The
Loopback Data Test
option allows you to perform the following loopback
tests:
External loopback data test
Internal loopback data test
Select Adapter
If you have a multiport or multiple 2700 Series Adapters in the system, use the
Select Adapter
option to select and then configure or view the settings of a
specific 2700 Series Adapter or one of its ports.
Exit
Fast!
UTIL
The
Exit
Fast!
UTIL option allows you to exit the utility and reboot the system.
After making changes to the 2700 Series Adapter in
Fast!
UTIL, make sure you
save the changes before you reboot the system.
CAUTION
Performing a low-level format destroys all data on the disk.
NOTE
When running an external loopback data test, make sure that the Fibre
Channel link is up or a loopback plug is attached to the 2700 Series Adapter
before starting the test.
