manualshive.com logo in svg

Qlogic QLE2740L-DEL, User Manual

Share
Download
Qlogic QLE2740L-DEL User Manual Download Page 127

C–QConvergeConsole GUI
Installing QConvergeConsole GUI

112

BK3254601-00  C

Installing the Agents from the QLogic Web Site

To obtain the agents from the QLogic Web site and install them (Windows and 
Linux, all versions):

1.

Go to the QLogic Downloads page at 

http://driverdownloads.qlogic.com

 and 

download the following for each adapter on the host server:

SuperInstaller 

Readme

 and 

Release Notes

2.

Install the agents by running the SuperInstaller. For detailed information on 
running the SuperInstaller, refer to the 

Readme

 and 

Release Notes

.

Installing the Agents Using the Built-in Agent Installer

To access the QCC Agent Installer within QConvergeConsole GUI:

1.

Point to the gear icon 

, point to 

Help

, and then click 

Download Agent 

Installers

. 

The QCC Agent Installer Utility opens in a separate window and lists links for 
the platform that the utility has detected.

2.

For each agent installer to download, click the link. 

3.

In the File Download dialog box, click 

Save

.

Installing QConvergeConsole GUI

Refer to the installation procedure for your operating system.

Installing QConvergeConsole in a Windows Environment

Installing QConvergeConsole in a Linux Environment

 

Installing QConvergeConsole in Silent Mode

 

NOTE

For detailed installation instructions, refer to the 

Installation 

Guide—QConvergeConsole GUI

 (part number SN0051105-00).

Summary of Contents for QLE2740L-DEL








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands