6–Configuring RoCE
Preparing the Adapter
50
BC0154503-00 C
Preparing the Adapter
The following steps describe how to enable DCBX, and specify the RoCE priority
using the HII management application. For information about the HII application,
see
Chapter 5, Preboot Adapter Configuration
.
1.
In the Main Configuration Page, select
Data Center Bridging (DCB)
Settings
, and then click
Finish
.
2.
In the Data Center Bridging (DCB) Settings window, click the
DCBX
Protocol
drop-down. The QL45212 Adapter supports both CEE and IEEE
protocols. This value should match the corresponding value on the DCB
switch. In this example, select
CEE
.
3.
Click the
RoCE Priority
field, and type a priority value. This value should
match the corresponding value on the DCB switch. In this example, type 5.
4.
Click
Back
.
5.
When prompted, click
Yes
to save the changes. Changes will not take effect
unit after a system reset.
Summary of Contents for QL45212
Page 111: ......
