manualshive.com logo in svg

Qlogic InfiniPath, Install Manual

Share
Download
Qlogic InfiniPath Install Manual Download Page 69

A – RPM Descriptions

OpenFabrics RPMs

IB0056101-00 C

A-5

Q

libopensm-2.0-xxx.2_0_0.

yyy

.x86_64.rpm

libopensm provides the library for OpenSM

Optional for
OpenFabrics
Used by OpenSM

libosmcomp-2.0-xxx.2_0_0.

yyy

.x86_64.rpm

libosmcomp provides the OS component library for OpenSM

Optional for
OpenFabrics
Used by OpenSM

libosmvendor-2.0-xxx.2_0_0.

yyy

.x86_64.rpm

libosmvendor provides the vendor library for OpenSM

Optional for
OpenFabrics
Used by OpenSM

librdmacm-2.0-xxx.0_9_0.

yyy

.x86_64.rpm

Support for the new connection manager

Optional for
OpenFabrics

librdmacm-utils-2.0-xxx.0_9_0.

yyy

.x86_64.rpm

Utilities for the new connection manager

Optional for
OpenFabrics

libsdp-2.0-xxx.1_1_0.

yyy

.x86_64.rpm

Can be LD_PRELOAD-ed to have a sockets application use
InfiniBand Sockets Direct Protocol (SDP) instead of TCP,
transparently and without recompiling the application

Required for
OpenFabrics

ofed-scripts-2.0-xxx.1_1.

yyy

.x86_64.rpm

OpenFabrics scripts

Optional for
OpenFabrics

openib-diags-2.0-xxx.1_1_0.

yyy

.x86_64.rpm

Useful programs for troubleshooting and checking state.

Optional for
OpenFabrics

perftest-2.0-xxx.1_0.yyy.x86_64.rpm

IB Performance tests

Optional for
OpenFabrics

srptools-2.0-xxx.0_0_4.

yyy

.x86_64.rpm

Support for SRP

Optional for
OpenFabrics

Table Notes

a

libibcm-utils-*

, the utilities for the

libibcm

library, are no longer installed. Checking

for dependencies on this RPM is advised.

b

Not available on ppc64 (Power)

Table A-7. OpenFabrics-Devel/RPMs

RPM name

Comments

dapl-devel-2.0-xxx.1_2_0.yyy.x86_64.rpm

Development files for uDAPL support

Optional for
OpenFabrics

b

libibcm-devel-2.0-xxx.0_9_0.

yyy

.x86_64.rpm

Development files for the libibcm library

Optional for
OpenFabrics

libibcommon-devel-2.0-xxx.1_0.

yyy

.x86_64.rpm

Development files for the libibcommon library

Optional for
OpenFabrics

a

Table A-6. OpenFabrics/RPMs (Continued)

RPM name

Comments

Summary of Contents for InfiniPath











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands