background image

4–Server Support Classes

QLGC_ObjectManager : CIM_ObjectManager

4-2

59223-03  E

Supported WBEM Operations 

getClass 

getInstance 

enumerateInstances 

enumerateInstanceNames 

Associations 

QLGC_NamespaceInManager : CIM_NamespaceInManager — 1To1 
relationship to QLGC_ObjectManager 

QLGC_ObjectManager : CIM_ObjectManager 

There will be one instance of ObjectManager representing the CIMAgent. 

Supported Properties and Methods 

CreationClassName 

Property will contain the string “QLGC_ObjectManager” 

Name 

Property will contain the switch WWN. 

SystemCreationClassName 

Property will contain the string “QLGC_FCSwitch”. 

SystemName 

Property will contain the switch WWN. 

Description 

Property will contain the string “Embedded CIMAgent” 

ElementName 

Property will contain the string “QLogic CIMAgent”, if the switch has 
been rebranded, then the property will contain a string with the format: 
“<brandname> CIMAgent”. 

OperationalStatus 

Property will contain the enumerated value 2=OK. 

StatusDescriptions 

Property will contain the string “OK”. 

Started 

Property will contain the value TRUE. If ObjectManager wasn't started, 
it wouldn't respond at all. 

                                                                                           

Summary of Contents for 3000 Series



































































































Reviews: