Chapter 4 Maintenance of Mechanical Components
Document Version V1.0.1 (09-21-2022)
45
J3-axis drive belt
2.5
9
120
44
J4-axis primary drive belt
1.3
9
45
25
J4-axis secondary drive
belt
1.3
20
75
100
Characteristics
•
Before measuring the installing tension of a new belt, turn it back and forth several
times. Abnormal drive shaft or irregular belt teeth will affect the tension of the belt
when it is running.
•
5,000 Hz maximum frequency.
•
Automatic shutdown if there is no operation within 5 minutes.
•
Manual shutdown by pressing the power button for 1 ~ 2 seconds.
•
Storage of 40 frequencies.
•
Two 3A batteries installed behind the meter.
4.4.5
Precautions
•
Avoid collision since any collision may cause damage to this product.
•
Do not spill water, solvents or any other liquids on this product.
•
Do not place this product in a dusty environment.
•
Keep this product away from heat.
