1
2
3
3
2
1
WARRIOR LITE |
3 OPERATING STEPS
CONNECT TUBING TO CDU
- Ensure CDU package is not compromised or expired
- Remove luer covers
- Connect tubing to CDU (the CDU inlet is the short PVC tube);
don’t overtighten
- The use of external infusion devices is permitted (up to 360 mmHg)
PRIME BOTH TUBING & CDU
- Ensure that all air is flushed out (19 ml priming volume)
- Can be primed with blood or fluid
- Consider using pressure beg or hand pump for
faster priming with RBC or Whole Blood
CONNECT CDU TO BASE UNIT
(or to Extension Cable)
- CDU protruding arrows should face the LED panel
- When using an Extension Cable, align protruding
arrows on the CDU and the connector (tactile direction).
- The system will turn on automatically (else, press the
on/off button located on the LED panel)
- Follow system’s indications on LED panel
NO MORE COLD BLOOD & FLUIDS
Note: This QUICK REFERENCE SHEET does NOT contain all the guidelines as per
the Instructions for Use (IFU). Therefore, please refer to the IFU for complete
guidelines regarding the operation of your Warrior device! Important: Users
must complete product training prior to operating the device!
Scan QR code to access all relevant information (note: authorization may be
required upon 1st login) or contact us at
