Qimarox PRORUNNER mk1, Assembly Instructions Manual

Page: 11 / 50

Assembly instructions PRORUNNER mk1 11
2.6 Residual risks
The machine is intended to be integrated into a transport system. Qimarox B.V has covered potential
dangers as much as possible. Eliminate or guard the following residual risks before putting the whole
assembly into service:

Risk of injury caused by falling products.

Risk of injury as a result of moving product holders.

Danger that occurs in places where the PRORUNNER mk1 connects to other parts of the
production line.
The interior of the machine is accessible through the large openings in the front frame. Guards may
also be required for the supply, output, infeed and outfeed conveyors.
All other sides of the machine do not need extra protection. However, one must, if the top cover on the
rear is accessible, make sure that the recess for the electric motor is not too large and possibly take
measures to make the recess smaller or inaccessible.
If the machine is not only accessible from ground level, guard the places where this may cause
danger.
2.7 Maintenance
The PRORUNNER mk1 may only be maintained by qualified personnel.
The safety instructions stated in the user manual must be observed. Deviating from the
instructions may result in unacceptable risks!
Only use spare parts from Qimarox B.V
The maintenance engineer must be familiar with the contents of the user manual.
2.8 Disposal and the environment
Use and maintenance of the lift do not bring along any environmental risks. All parts can be disposed
of as customary.
ENVIRONMMENT
Consider local legislation, rules, instructions and precautions regarding safety, health
and the environment.
2.9 Further support and information
Qimarox B.V. is committed to providing the best user support. The support may include the following:

Training

Installation assistance

Service contracts
Contact Qimarox B.V. for more information.