30
UM Pallet stacker Prmk10-PS v2.0 EN
Lift forks
Check lift forks for wear
and tear damage.
Replace lift forks.
Cleaning
WARNING
•
Do not use any corrosive and inflammable solvents or cleaning agents
on the pallet stacker that contain TRI, PER, TETRA or FCHC. Read the
instructions on the packaging when chemical substances (cleaning
agents) are used.
•
Electrical components should not make contact with water or other
liquids.
•
Do not clean the pallet stacker with compressed air or water.
•
Avoid parts made of rubber or plastic, such as cables and gaskets, from
making contact with oil, solvents or other chemicals.
1.
Make sure there are no pallets on the machine.
2.
Switch off the machine.
3.
Secure the main power supply switch with a padlock.
4.
Make sure the air service unit is switched off and cylinders are vented
(see section
Fout! Verwijzingsbron niet gevonden.
).
5.
Remove deposits and dirt by hand.
6.
Make sure safety decals on cylinders are clean and clearly visible. If damaged,
replace them before turning on machine.
7.
Report any damage to the technically responsible person or to Qimarox and make
sure that all damage is remedied before restarting the machine