QIAsymphony SP/AS Consolidated Operating Guide 12/2017
47
To synchronize files on a USB stick with files on the QIAsymphony SP/AS, follow the steps below.
1.
Log in to the instrument with the “Supervisor” user ID.
2.
Prepare the USB stick for synchronization. Insert the USB stick into one of the USB ports at the
front of the QIAsymphony SP.
3.
Press
File Transfer
in the
Tools
screen to enter the
In-/Output Files
tab menu.
4.
Select one of the file transfer tabs (
In-Output Files
,
Process Files
,
Instr. Setup Files
).
5.
Select the file type(s) that should be synchronized by pressing the appropriate button(s) in the
Save to USB stick
panel.
6.
Set
Synchronize files
to
Yes
by pressing the
Yes
button.
7.
Press the
Transfer
button in the command bar of the screen to synchronize the selected files.
A message appears informing you that the files will be synchronized. Check that the
information is correct.
8.
To continue with the synchronization, press
Yes
.
After successful synchronization, a message will appear confirming synchronization.
9.
Remove the USB stick.
6.6
Deleting files
Different tools can be used to delete files from QIAsymphony SP/AS instruments. We recommend
using the
File Transfer
tool of the QIAsymphony Management Console.
If the QIAsymphony SP/AS is not connected to the network, there is a method for deleting all
input and output files, except log files, and a method for deleting all other files.
For detailed information about deleting files, refer to Section 8.5 of the
QIAsymphony SP/AS
User Manual — General Description
.
Summary of Contents for QIAsymphony SP
Page 213: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 213 This page intentionally left blank...
Page 214: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 214 This page intentionally left blank...
Page 216: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 216 www qiagen com...
