Qiagen QIAsymphony SP, Operating Manual

Page: 19 / 216

QIAsymphony SP/AS Consolidated Operating Guide 12/2017 19
2.7 Mechanical hazards
The hoods of the QIAsymphony SP/AS instruments must remain closed during operation. Only
open the hoods when instructed to do so by the software.
WARNING
Moving parts
To avoid contact with moving parts during operation of QIAsymphony SP/AS
instruments, the instruments must be operated with the hoods closed. If the hood
sensors are not functioning correctly, contact QIAGEN Technical Services.
WARNING
Strong magnetic field
Do not place QIAsymphony SP/AS instruments near magnetic storage systems
(e.g., computer discs).
Do not use metal tools when handling the magnetic rods.
Do not allow the magnetic rods to come into contact with other magnets.
CAUTION
Damage to the instrument(s)
Make sure to install the magnetic-head guards before operating the
QIAsymphony SP.
2.8 Heat hazard
The QIAsymphony SP supports a lysis station that can be heated, if required by the protocol. In
addition, both the QIAsymphony SP and the QIAsymphony AS support a UV lamp.
WARNING
Hot surface
The lysis station and the UV lamps can reach temperatures of up to 70°C
(158°F). Avoid touching them during operation.
2.9 Maintenance safety
WARNING/
CAUTION
Risk of personal injury and material damage
Only perform maintenance as described in this consolidated operating guide.