QIAsymphony SP/AS Consolidated Operating Guide 12/2017
125
12.3.5
Removing assays after an AS run
When an assay run is completed or canceled, the assays must be removed from the “Assays”
drawer. The assays will not be automatically removed from the QIAsymphony AS.
If the status of a run is shown as
QUEUED
,
STOPPED
, or
COMPLETED
, the assay rack(s) and
adapter(s) can be removed.
1.
Press the
Assay Setup
tab to access the
Assay Setup/Overview
screen.
The
Assay Setup
screen will open.
2.
Press
Remove
in the
Assay Setup/Overview
screen.
A message will be displayed that this will stop the cooling for all slots.
3.
Press
Yes
. Cooling is now switched off for all slots.
Cooling for the eluate rack(s) is also switched off at this point. In an
integrated run, the eluate rack is moved back to the QIAsymphony SP and
is cooled there.
4.
Open the “Assays” drawer and the “Eluate and Reagents” drawer. The
Assay Setup/Loading
Information
screen appears.
5.
Physically remove all racks, including the assay rack(s).
6.
Close the “Assays” and the “Eluate and Reagents” drawers.
7.
In the
Assay Setup/Loading Information
screen, press
Cancel
. The
Overview
screen is opened.
If more QIAsymphony AS runs are to be performed, proceed with loading the
next QIAsymphony AS run.
Important
The loading instructions for the next QIAsymphony AS run are already
displayed. It is possible but not necessary to proceed with loading the next batch
now.
Important
In integrated mode, the sample rack staying in the QIAsymphony SP cannot be
removed in this step.
Summary of Contents for QIAsymphony SP
Page 213: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 213 This page intentionally left blank...
Page 214: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 214 This page intentionally left blank...
Page 216: ...QIAsymphony SP AS Consolidated Operating Guide 12 2017 216 www qiagen com...
