Qiagen QIAsymphony AS, Operating Manual

Page: 54 / 216

QIAsymphony SP/AS Consolidated Operating Guide 12/2017 54
8 Loading QIAsymphony SP Drawers
This section describes how to load and unload the worktable and how to perform inventory scans
to operate the QIAsymphony SP instrument.
Workflow loading of QIAsymphony drawers.
We recommend loading the drawers in the order:
1. “Waste” drawer
2. “Eluate” drawer
3. “Reagents and Consumables” drawer
4. “Sample” drawer
8.1 Using the software Wizard
The QIAsymphony SP operating software offers a Wizard that provides step-
by-step guidance for setting up a run.
The Wizard takes you through:

Loading the “Waste” drawer

Loading the “Eluate” drawer

Loading the “Reagents and Consumables” drawer

Loading the “Sample” drawer

Defining a batch/run with or without work lists

Loading internal controls
It is possible to set up a run on the QIAsymphony SP with or without the Wizard .
Important
The Wizard can only be used for setting up independent sample preparation
runs. It cannot be used to set up an integrated run.