Qiagen QIAgility, User Manual, Page: 89 / 334

QIAgility Software
QIAgility User Manual 11/2011 5-27
2. The “Calibration Settings” dialog box will appear. Ensure
that the displayed serial number matches the serial
number of the instrument that is connected. Click on the
“Save” button to continue.
3. A default filename and location will be supplied. If
desired, these can be changed.
4. Click on the “Save” button. The current calibration
settings are now saved on the ‘Setup Disk’ and can be
transferred to another computer.
5.5.2 Load calibrations from setup disk
To transfer calibration settings from a ‘Setup Disk’ to a
different computer:
1. Select “Options/Calibration management/Load
calibrations from setup disk”.