Qiagen QIAgility, User Manual, Page: 88 / 334

QIAgility Software
5-26 QIAgility User Manual 11/2011
If the login was successful the new rights will take effect
immediately.
5.4.6 Revert to first user
If you want to revert to the user who started the software,
select “Options/User Management/Revert to First User”.
5.5 Manage calibration data
The “Calibration Management” menu provides options to
transfer calibration settings and other software settings from
one computer to another, using a ‘Setup Disk’. This is useful
when the instrument is connected to a new computer. The
‘Setup Disk’ can be any storage device (e.g., USB stick).
Note : It is not necessary to use a ‘Setup Disk’ when the
software is updated to a new version. Calibration settings will
be retained.
Warning : A ‘Setup Disk’ that is created for one instrument
should never be used with another instrument, as this may
result in damage to the instrument.
5.5.1 Save calibrations on setup disk
To create a ‘Setup Disk’:
1. Select “Options/Calibration Management/Save
calibrations on setup disk”.