Qiagen QIAgility, User Manual, Page: 224 / 334

Operating Procedures
6-12 QIAgility User Manual 11/2011
4. If the run has been set up correctly, the checklist will not
list any warnings or errors other than those listed above.
If errors are listed, user intervention is required before
the run can be started. Select the boxes next to the
warnings to continue.
5. Click on the “Pre-Run Report” button to view the pre-run
report. Check the worktable setup.
6. Click on the “OK” button to start the run.
7. The location of the pipetting head will be highlighted on
the software worktable in real time, and a summary of
the progress of the run will be displayed in the right-
hand pane. See Section 5.3.4.
6.5 Pausing/aborting a run
A run can be paused and aborted at any time.
Pauses will be logged in the post-run report. If the run is
aborted, the instrument will discard the tip and return to its
resting position.
To pause a run:
1. Click on the icon in the toolbar, or select
“Pause/Abort” from the “File” menu.