Qiagen QIAgility, User Manual

Page: 105 / 334

QIAgility Software
QIAgility User Manual 11/2011 5-43
5.6.12 Configure multi-eject options
1. Select “Options/Run Settings/Set tip usage options”.
2. The “Tip Usage” dialog box will appear. See
Section 5.6.11 for more details about configuring tip
usage options.
3. Select “Re-use tips where possible”, or “Use each tip for
one operation only”, and then click on the “Multi-Eject
Settings” button.
4. The “MULTI-EJECT” dialog box will open.
Use air on
multi-eject
Select to blow out air on the final ejection.
This limits accumulation of liquid on the tip
interior. This is a default setting when tip
reuse is selected, but is an optional setting
when single tip usage has been selected.
Apply Default
Initial Ejection
Volumes
Select to apply default initial ejection
volumes (i.e., 1 µl for 50 µl tips, and 4 µl
for 200 µl tips).
Specify Initial
Ejection
Volume
Select to specify initial ejection volumes.
The initial ejection volume is the volume
that is aspirated and ejected into the
source well before ejecting into target wells
starts.