Qiagen QIAcuity 911000 User Manual Download Page 16

Page: 16 / 314

QIAcuity User Manual 06/2022

Maintenance safety

WARNING/

CAUTION

Risk of personal injury and material damage

[W11]

Only perform maintenance that is specifically described in this user manual.

WARNING

Risk of fire

[W12]

Do not allow cleaning fluid or decontamination agents to come into contact
with the electrical parts of the QIAcuity.

CAUTION

Damage to the instrument

[C8]

Do not use bleach, solvents, or reagents containing acids, alkalis, or abrasives
to clean the QIAcuity.

CAUTION

Damage to the instrument

[C9]

Do not use spray bottles containing alcohol or disinfectant to clean surfaces of
the QIAcuity.

Radiation safety

WARNING

Risk of personal injury

[W13]

Hazard Level 2 laser light: Do not stare into the light beam when using
handheld bar code scanner.

Summary of Contents for QIAcuity 911000



























































































































































































































































































































Search results

Summary of Contents for QIAcuity 911000

Reviews:

Related manuals for QIAcuity 911000

Brands by name

Popular brands

Qiagen QIAcuity 911000, User Manual

Search results

Summary of Contents for QIAcuity 911000

Reviews:

Related manuals for QIAcuity 911000

Brands by name

Popular brands