Qiagen QIAcuity 911000, User Manual

Page: 148 / 314

QIAcuity User Manual 06/2022 148
Table continued from previous page
Table 12 (cont). Required steps in creating a plate
Tab Steps
Plate layout Provide the following information:
 Add reaction mix
 Mark as blank
 Add sample
 Add control
 Add NTC
Defining General Data
In the General Data tab, you can specify the basic information about the plate. Mandatory input
fields are marked with an asterisk. The plate name is required to save a plate.
Note
: Please make sure that selected Plate type corresponds with the entered barcode, if manually
entered. If not matching, it will lead to error on the instrument (error 205).