Qiagen Q-Base, User Manual, Page: 23 / 40

Q-Base User Manual 03/2019 23
Note : The Q-Base IP address can be found in the bottom-left corner of the screen of the
QIAcube Connect App.
Note : Q-Base uses a self-signed certificate for the https connection. Therefore, the browser
may issue a security warning. Ignore the warning or add an exception to access the Q-Base
configuration.
3. Enter the login id and the password that was set during initial Q-Base set up (Section 4.3).
4. You can now access the Maintenance features, System Time Settings and Instrument
Administration via the sidebar on the left.
4.5.1 Save log files
To save log files from Q-Base, follow the instructions below:
1. Select Maintenance from the sidebar.
2. Insert a USB stick into a Q-Base USB port.
3. Click Mount USB and then click Copy Log Files .
4. The log files will be copied onto the USB stick.
5. Click Unmount USB before removing the USB drive.